AUD exc. GST
The Sega to ATX Power Supply Adapter Kit is a two PCB kit that allows you to replace Sega power supplies, such as the Model 1 and Model 3 PSU, with a generic ATX power supply without needing to modify the wiring loom.
This kit addresses need withint the amusement and arcade industry, as many of these types of power supplies are no longer available and can mean extra dollars to spend if you need to replace this crucial part.
The Sega to ATX Power Supply Adapter Kit will include two boards and a 30cm IEC C13 to C14 cable, and can be used in games such as: Sega Rally Championship, Virtua Cop 2, Harley Davidson & L.A. Riders, Daytona USA 2, The Lost World: Jurassic Park, Virtua Striker 2 Version ’98, and many, many more!
The DC Board has indicator LEDs for the presence of 3.3v, 5v, and 12v, and there is a connector labelled Astro to the board for the Service, Test, AF+ and AF- for Astro City.
The kit will include 2 boards. One board will accept the existing 110V plug in, and will have an IEC female output to go to the ATX power supply. The second board will take the 20 or 24 pin ATX plug and present the same connectors as you get on the original power supply.
There are quite a few power supplies that can be replaced with this kit, such as those listed below can be replaced (Note: Some power supplies do not have a 3.3v connector. If that is the case then the connector is simply not used):
- 400-5330-03 PSU
- JQA Power Supply / 400-5330-02-91
- NVS-4000 PSU - This unit is common in Astro cabinets and has a couple of extra wires which we have also included on the replacement board.
- 400-5264-91 PSU
- 400-5306-01 PSU
This innovative adapter kit is one-of-a-kind and will help to increase the longevity of your Sega machines!