MS100 Top Load electronic coin mechanism. 4-Coin acceptor with a Positive Common Interface only. It needs a 12 volt supply, but will work with a voltage of between 10 and 15 volts. Peak operating current is 2.3A (at moment of coin acceptance). The acceptor has a 13 pin connector.
This is a front load / bottom reject coin mechanism. It allows coins to be loaded directly into the front of the coin mech. This allows for adaptation of the coin mechanism to different style coin face plates.
The setting of channels is done using special programming units and software.
A new eeprom is required to allow for reprogramming of the coin mechanism PROM:
The E+1V eeprom (blue coloured) used for 1k and 2k vending machine applications.
The E+1VA (green coloured) used for amusement and gaming machine applications.
MS100 Top Load electronic coin mechanism. 4-Coin acceptor with a Positive Common Interface only. It needs a 12 volt supply, but will work with a voltage of between 10 and 15 volts. Peak operating current is 2.3A (at moment of coin acceptance). The acceptor has a 13 pin connector.
This is a front load / bottom reject coin mechanism. It allows coins to be loaded directly into the front of the coin mech. This allows for adaptation of the coin mechanism to different style coin face plates.
The setting of channels is done using special programming units and software.
A new eeprom is required to allow for reprogramming of the coin mechanism PROM:
The E+1V eeprom (blue coloured) used for 1k and 2k vending machine applications.
The E+1VA (green coloured) used for amusement and gaming machine applications.
Unit Dimensions :
5.0W x 12.8D x 14.0H cms
Condition :
Used
Shipping Weight :
0.400 kg
Location :
Australia
Shipping Terms :
Ex Works
Warranty :
30 Days Testing Warranty
Product Type :
Coin Mechs
More About Mars MS100 Series Coin Mech - Front Load
Specifications:
Pin Out
13 V.Com Selects Output Polarity
12 Ch. F Output
11 Blank
10 Ch. E Output
9 Ch. D Output
8 Blank
7 Ch. C Output
6 Ch. C Inhibit
5 +12V DC Supply +
4 0V DC Supply -
3 Ch. D Inhibit
2 Ch. E Inhibit
1 Ch. F Inhibit
Mars MS100 Series Coin Mech - Front Load - Actual Screenshots
